| General specifications |
| Switching element function |
NAMUR, NC |
| Rated operating distance |
8 mm |
| Installation |
non-flush |
| Output polarity |
NAMUR |
| Assured operating distance |
0 ... 6.48 mm |
| Reduction factor rAl |
0.42 |
| Reduction factor rCu |
0.4 |
| Reduction factor r304 |
0.72 |
| Nominal ratings |
| Nominal voltage |
8.2 V (Ri approx. 1 kΩ) |
| Switching frequency |
0 ... 300 Hz |
| Hysteresis |
1 ... 15 typ. 5 % |
| Reverse polarity protection |
reverse polarity protected |
| Short-circuit protection |
yes |
| Current consumption |
|
|
Measuring plate not detected |
min. 3 mA |
|
Measuring plate detected |
≤ 1 mA |
| Switching state indication |
Multihole-LED, yellow |
| Compliance with standards and directives |
| Standard conformity |
|
|
NAMUR |
EN 60947-5-6:2000
IEC 60947-5-6:1999 |
|
Electromagnetic compatibility |
NE 21:2007 |
| Approvals and certificates |
| FM approval |
|
|
Control drawing |
116-0165F |
| UL approval |
cULus Listed, General Purpose |
| CSA approval |
cCSAus Listed, General Purpose |
| CCC approval |
CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature |
-25 ... 100 °C (-13 ... 212 °F) |
| Storage temperature |
-40 ... 100 °C (-40 ... 212 °F) |
| Mechanical specifications |
| Connection type |
Connector M12 x 1 , 4-pin |
| Core cross-section |
- |
| Housing material |
Stainless steel 1.4305 / AISI 303 |
| Sensing face |
PBT |
| Housing diameter |
18 mm |
| Protection degree |
IP67 |
| General information |
| Use in the hazardous area |
see instruction manuals |
|
Category |
1G; 2G; 1D |
放大图片
暂无相关下载
